Do It Yourself Components

Construction Plans and Drawings

with Assembly Tips & Techniques – download-……….$149.00 (Click here for more info on plans)

Ribs

Rib Segment Paper Pattern; Full Scale for 9 Ft Diameter Rib Segment. …..$12.95

Rib Segment 1/8th inch Plastic Template, Full Scale for 9 Ft Diameter Rib. …..$29.95

Combination 1 – Rib Segment Paper Pattern, Plus 1 – Rib Segment 1/8th Inch Plastic Template, Full Scale for 9 Ft Diameter Rib. …..$29.95

Component Kits

3 Layer Rib (27 Segments) Kit for 1- 9 foot Diameter Rib. Made of ¾ Inch thick CCX* Plywood, Includes 27 Segments comprising of standard segments and floor joist ledgers) Just add: Adhesive, 1- 2 x 4 x 8 Floor Joist, Fasteners/Screws and 5/8th x 3 inch wood dowel pins……$269.00 

4 Layer Rib (Front and Rears eave) (36 Segments) Kit for 1- 9 foot Diameter Rib. Made of ¾ Inch thick CCX* Plywood, Includes 36 Segments comprising of standard segments and floor joist ledgers) Just add: Adhesive, 1- 2 x 4 x 8 Floor Joist, Fasteners/Screws and 5/8th x 3 inch wood dowel pins……$349.00

Front Entry Rib/Bulkhead Component Kit with Door. All following components are made of either ¾ or ½ CCX Plywood ready for you to radius the edges and fill excess knot holes as needed, sand, and finish. Kit includes; 63 Rib segments(7 layers) Exterior wall panels (½ inch ccx plywood), Door jamb spacers, Inside and outside door skins, door skin spacers, 9ea-Window spacer rings, 6ea-Window trim rings, 2-3 piece door casing, Just add locally available materials: Adhesive, 2 x 4 Joists, 2 x 4 Studs, plates or locally available dimensional lumber, Screws, Hinge (continuous/piano type recommended), Insulation, window panes, Caulking, Spray Foam Sealant) Entry lock /latch, Dowel pins. 
Front Entry Rib/Bulkhead Component Kit with Door.…..$1495.00

Rear Exit Rib/Bulkhead Component Kit with Door. All following components are made of either ¾ or ½ CCX Plywood ready for you to radius the edges and fill excess knot holes as needed, sand, and finish. Kit includes; 63 Rib segments(7 layers) Exterior wall panels (½ inch ccx plywood), 9 piece (3 layers) Door jamb, Inside and outside door skins, door skin spacers, 3ea-Window spacer rings, 2ea-Window trim rings, 2-3 piece door casing(inside and out,)
Just add locally available materials: Adhesive, 2 x 4 Joists, 2 x 4 Studs, plates or locally available dimensional lumber, Screws, Hinge (continuous/piano type recommended), Insulation, window panes, Caulking, Spray Foam Sealant) Entry lock /latch, Dowel pins.
Rear Exit Rib/Bulkhead Component Kit with Door. …..$1395

Dome Skylight Kit, 16 inch
Mount between two ribs anywhere a fixed window is desired 11ea-Tunnel Rings cut from 3/4 CCX ply with pre-drilled assembly holes 1ea-Domes, poly clear with diffuser texturing. Ready for assembly and finishing.

16 inch Sky Light Kit…..$235
16 inch Sky Light Kit …………….two or more………………$195
*CCX Yes CCX plywood NOT lesser grade CDX plywood
* Building your own rib assembly jig is recommended to assure a round profile.

Assembled Components

9 foot Diameter Rib. 3 (three) Layer Lamination with ¾ Inch thick CCX* Plywood, Bonded with F-27 Adhesive, 1- 2 x 4 Floor Joist installed, pegged with 5/8th x 3 inch birch wood dowels, and more than 200 Screws.
Fully assembled and ready to use 1 ea…..$390

9 foot Diameter Rib. 4 (four) Layer (Recommended at the front or rear when a bulkhead partition is more than 16 inches away.) Lamination with ¾ Inch thick CCX* Plywood, Bonded with F-27 Adhesive, 1- 2 x 4 Floor Joist installed, pegged with 5/8th x 3 inch birch wood dowels, and more than 200 Screws.
Fully assembled and ready to use 1 ea…..$490

Front Entry Rib/Bulkhead Assembly with Door. 9 foot Diameter. Following components are made of either ¾ or ½ CCX Plywood. Assembly includes 63 Rib segments(7 layers), Exterior wall panels (½ inch ccx plywood), 3 piece Door jamb, 2ea-3 piece door casings, 1.500 inch EPS foam Insulation, and Dimensional lumber: 3- 2 x 4 Floor Joists, Studs, stiffeners, plates, , Bonded with F-27 Adhesive, Spray foam in insulation voids pegged with 5/8th x 4 inch birch wood dowels, and more than 250 Screws. Hobbit Front Door (May be deleted if an alternate door is to be used. Deduct $400)
Door Skins (inside and out), Door internal pieces, door skin spacers, Window jamb rings 2- Window trim, 9 Window spacer rings, 6ea-Window trim rings, Door hinge (piano/continuous type), 1.500 inch EPS door foam Insulation, Plexiglas windows, Spray foam in insulation voids. All screwed and glued.
Does not include Entry lock /latch. Ready for you, if needed, fill excess knot holes, sand, caulk, and finish/paint and decorate.
Front Entry Rib/Bulkhead Assembly with Door …..$1995

Rear Entry Bulkhead Assembly with Door. 9 foot Diameter. Following components are made of either ¾ or ½ CCX Plywood. Assembly includes 63 Rib segments(7 layers), Exterior wall panels (½ inch ccx plywood), 9 piece (3 layers) Door jamb, 2ea-3 piece door casings, 1.500 inch EPS foam Insulation, and Dimensional lumber: 3- 2 x 4 Floor Joists, Studs, stiffeners, plates, , Bonded with F-27 Adhesive, Spray foam in insulation voids pegged with 5/8th x 4 inch birch wood dowels, and more than 250 Screws. Hobbit Rear Door (May be deleted if an alternate door is to be used. Deduct $350)
Door Skins (inside and out), Door internal pieces, door skin spacers, 3-Window jamb rings 2-Window trim, Door hinge (piano/continuous type), 1.500 inch EPS door foam Insulation, Plexiglas window, Spray foam in insulation voids. All screwed and glued. Does not include Entry lock /latch. Ready for you, if needed, fill excess knot holes, sand, caulk, and finish/paint and decorate.
Rear Entry Bulkhead Assembly with Door…..$1795

Bathroom Bulkhead/Rib Assembly with Door. 9 foot Diameter. Following components are made of ¾ CCX Plywood. Assembly includes 36 Rib segments(4 layers), 3 piece single thickness wall panel, 2ea-3 piece door casings, and Dimensional lumber: 2- 2 x 4 Floor Joists, Stud, stiffeners, plates, Bonded with F¬27 Adhesive, pegged with 5/8th x 4 inch birch wood dowels, and more than 200 Screws Hobbit Style Bathroom Door (May be deleted if an alternate door is to be used. Deduct $200) ¾ inch plywood Door, Door hinge (piano/continuous type), All screwed and glued.
Does not include lock /latch. Ready for you, as needed, fill excess knot holes, sand, caulk, and finish/ paint and decorate.
Bathroom Bulkhead/Rib Assembly with Door. …..$845